faqs

Frequently Asked Questions

Customer questions & answers

How to install MagOne 2nd Gen silicone straps

Step 1. Align the gap between steel shaft and silicone strip with product slot.

Step 2. Gently push forward to slide into the slot.

MagOne Economic System

Q1.Is the MagOne Economic System compatible with my phone?

- MagOne System works with all smartphones (except flip phones).

- MagOne System is MagSafe-compatible, which means it works with iPhone 12 series or later.

- For non-MagSafe devices, please use a Magnetic Sticker in order to use the MagOne System.

Q2.Can I use the MagOne System with a phone case?

-Yes! The MagOne System works with and without a phone case. You can use MagSafe-compatible cases or cases up to 1.5mm thick.

For non-MagSafe cases, please use a Magnetic Sticker in order to use the MagOne System.

 

MagOne

1.Does this need to be removed in order to use MagSafe charging?

 

When using Magsafe charging, you don't need to remove the phone grips&kickstands.They are compatible.This phone grip&kickstand will not block wireless charging, so it is possible for wireless charge with the grip&kickstand stay on your iPhone. It will only compatible with magnetic wireless charger but not traditional wireless charging pad.
Please note:
1. as we've tested, the official wireless charger will work well. But the official wireless battery pack will not work.
2. If you are using a phone case, please make sure it is MagSafe compatible, and thickness less than 1.5mm is required.
Watch above video to see how it works. 

2.Will this work for magnetic mounts?

Yes.The back side of the grip is also magnetic, but its magnetism only support it to properly work with a MagSafe compatible mounting system, you can not stick it to a steel surface.
Please note: a MagSafe compatible case is a MUST have when you need this feature work well.

3.How to replace the silicone strap?

The MG201 was factory packed with 2 replacement silicone strap.

The video show how to replace it.

MagOne Lite

1.Does MG202 need to be removed in order to use MagSafe charging?

The MagOne Lite allows you to attach your magnetic wireless charger on, and since the center of the product has no metal and it is only 2.8mm thickness, so it's friendly to wireless charging.

Note:

  • Not work with bare wireless charger.
  • Make sure your case less than 1.5mm thickness.
  • Be sure to use at least 20W power adapter.

1.Does this need to be removed in order to use MagSafe charging?

 

 

 

 

 

  This phone grip will not block wireless charging, so it is possible for wireless charge with the grip stay on your iPhone. It will only compatible with magnetic wireless charger but NOT traditional wireless charging pad.
Please note:
 

 

  1. as we've tested, the official wireless charger will work well. But the official wireless battery pack will not work.

 

  2. If you are using a phone case, please make sure it is MagSafe compatible, and thickness less than 1.5mm is required.
  Watch above video to see how it works.

2.Will this work for magnetic mounts

 

 

 

 

 

 

Yes.The back side of the grip is also magnetic, but its magnetism only support it to properly work with a MagSafe compatible mounting system, you can not stick it to a steel surface.
 

 

  Please note: a MagSafe compatible case is a MUST have when you need this feature work well.

3.How to replace the silicone strap?

 

 

 

 

 

 

 

 

  The MG201 was factory packed with 2 replacement silicone strap.

 

  The video show how to replace it.

Shipping

Shipping Policy

After you place an order, we will ship it within three days. If you are in the US, the shipping time will take about 3-5 days. If you are outside the US, it will take about 10 days from when you place your order to when you receive it.

COVID - 19

During global pandemic delivery may be late.
You can contact us at any time through the following contact information.
E-mail: service@magonetech.com
WhatsApp: +8617788771427

Returns

30 Day Return Policy

1.Customer service is our utmost priority. If there is any reason you are not satisfied, you have 30 days from purchase to return it with a money-back guarantee.

2. Once we receive your email, a member of our team will provide you with a Return Authorisation Form to complete and send back to us. The form must be included with your return. Please keep in mind, we don’t cover the shipping cost for the returned device. We advise that you hold onto your tracking information as we’re not responsible for lost packages by the carrier.

3. Once we receive the return device to our warehouse, it will take approximately 2 business days to process a refund.

4. Once we issue a refund, it can take 5-7 business days for it to reflect in your original method of payment.Please note all returns must include a Return Authorisation Form. We must receive the items within 30 days of purchase. Please reach out to our Customer Experience Team via email at service@magonetech.com,WhatsApp:+8617788771427

Others

Affiliates + PR

We welcome the opportunity to work with companies and organisations within public relations, please contact us.
E-mail: service@magonetech.com
WhatsApp: +8617788771427

Frequently Asked Questions

Customer questions & answers

How to install MagOne 2nd Gen silicone straps

Step 1. Align the gap between steel shaft and silicone strip with product slot.

Step 2. Gently push forward to slide into the slot.

MagOne Economic System

Q1.Is the MagOne Economic System compatible with my phone?

- MagOne System works with all smartphones (except flip phones).

- MagOne System is MagSafe-compatible, which means it works with iPhone 12 series or later.

- For non-MagSafe devices, please use a Magnetic Sticker in order to use the MagOne System.

Q2.Can I use the MagOne System with a phone case?

-Yes! The MagOne System works with and without a phone case. You can use MagSafe-compatible cases or cases up to 1.5mm thick.

For non-MagSafe cases, please use a Magnetic Sticker in order to use the MagOne System. It is included per package.

 

MagOne

1.Does this need to be removed in order to use MagSafe charging?

 

This phone grip will not block wireless charging, so it is possible for wireless charge with the grip stay on your iPhone. It will only compatible with magnetic wireless charger but not traditional wireless charging pad.
Please note:
1. as we've tested, the official wireless charger will work well. But the official wireless battery pack will not work.
2. If you are using a phone case, please make sure it is MagSafe compatible, and thickness less than 1.5mm is required.
Watch above video to see how it works. 

2.Will this work for magnetic mounts?

Yes.The back side of the grip is also magnetic, but its magnetism only support it to properly work with a MagSafe compatible mounting system, you can not stick it to a steel surface.
Please note: a MagSafe compatible case is a MUST have when you need this feature work well.

3.How to replace the silicone strap?

The MG201 was factory packed with 2 replacement silicone strap.

The video show how to replace it.

MagOne Lite

1.Does MG202 need to be removed in order to use MagSafe charging?

Of course.The MagOne Lite allows you to attach your magnetic wireless charger on, and since the center of the product has no metal and it is only 2.8mm thickness, so it's friendly to wireless charging.

Note:

  • Not work with bare wireless charger.
  • Make sure your case less than 1.5mm thickness.
  • Be sure to use at least 20W power adapter.

1.Does this need to be removed in order to use MagSafe charging?

 

 

 

 

 

  This phone grip will not block wireless charging, so it is possible for wireless charge with the grip stay on your iPhone. It will only compatible with magnetic wireless charger but NOT traditional wireless charging pad.
Please note:
 

 

  1. as we've tested, the official wireless charger will work well. But the official wireless battery pack will not work.

 

  2. If you are using a phone case, please make sure it is MagSafe compatible, and thickness less than 1.5mm is required.
  Watch above video to see how it works.

2.Will this work for magnetic mounts

 

 

 

 

 

 

Yes.The back side of the grip is also magnetic, but its magnetism only support it to properly work with a MagSafe compatible mounting system, you can not stick it to a steel surface.
 

 

  Please note: a MagSafe compatible case is a MUST have when you need this feature work well.

3.How to replace the silicone strap?

 

 

 

 

 

 

 

 

  The MG201 was factory packed with 2 replacement silicone strap.

 

  The video show how to replace it.

Shipping

Shipping Policy

Shipping in US takes 7 - 14 business days, after an order is dispached.
Shipping worldwide takes 8 - 17 business days, after an order is dispached.

COVID - 19

During global pandemic delivery may be late.

If order will be late more than 14 business days in US, and more than 30 business days worldwide, please feel free to contact us at service@magonetech.com

Returns

30 Day Return Policy

1.Customer service is our utmost priority. If there is any reason you are not satisfied, you have 30 days from purchase to return it with a money-back guarantee.

For orders made on our website, returns are accepted within the first 30 days from the date of purchase.

2. Once we receive your email, a member of our team will provide you with a Return Authorisation Form to complete and send back to us. The form must be included with your return. Please keep in mind, we don’t cover the shipping cost for the returned device. We advise that you hold onto your tracking information as we’re not responsible for lost packages by the carrier.
3. Once we receive the return device to our warehouse, it will take approximately 2 business days to process a refund.

4. Once we issue a refund, it can take 5-7 business days for it to reflect in your original method of payment.Please note all returns must include a Return Authorisation Form. We must receive the items within 30 days of purchase. Please reach out to our Customer Experience Team via email at service@magonetech.com

Uncategorized

Affiliates + PR

For Information about working with us as an affiliate on a commission basis contact support@magonetech.com

We welcome the opportunity to work with companies and organisations within public relations, please email your enquiry to support@magonetech.com